Descriere
AJA Bridging HD SMPTE ST 2110 Video and Audio to HDMI
IP Converters
Prezentare generală
The IPR-10G2-HDMI Mini-Converter is designed to bridge SMPTE ST 2110 networks to HDMI, with support up to UltraHD 50p or HD 60p.
IPR-10G2-HDMI receives SMPTE ST 2110 audio and video over 10 GigE, and then de-encapsulates the data to output baseband HDMI video. Associated audio from the SMPTE ST 2110 stream is likewise extracted, synchronized, and embedded into the HDMI output. Simultaneously, analog stereo audio is available via the dual RCA outputs.
2x 10 GigE SFP+ cages are provided, allowing “hitless switching”* redundancy protection (ST 2022-7) for critical distribution and monitoring applications.
The analog/tri-level reference input allows the baseband output of IPR-10G2-HDMI to be locked to the timing of the baseband environment at destination. IPR-10G2-HDMI includes a full-size HDMI 1.4b video output for seamless integration into existing baseband environments such as master control, trucks, edit suites, multi-viewer applications and HDMI displays.
*Hitless switching via ST 2022-7 is supported up to 1080p 60 (UltraHD is not supported)
Caracteristici
IPR-10G2-HDMI extracts a SMPTE ST 2110 essence from an incoming IP stream and presents it for monitoring on, or routing to, HDMI devices. Providing two SFP+ cages for redundancy protection via “hitless switching”, IPR-10G2-HDMI is rugged, quiet and fanless. AJA Mini-Converter design is ideal for placement in a wide range of display and device scenarios, from studios to field.
Key features:
- SMPTE 2110 audio, video receiver
- Rugged, quiet, fanless design
- 2x 10 GigE SFP+ cages for media LAN (providing support for “hitless switching” up to 1080 60p) with status light
- 1x 1 GigE RJ-45 socket for control LAN with status light
- Dedicated HDMI receiver with full size (standard type A) HDMI 1.4b (24/30-bits per pixel) output up to HD 60p, 4:2:2, 10-bit, YCbCr/RGB, or UltraHD 30p, 4:2:2, 8-bit, YCbCr, or UltraHD 50p, 4:2:0, 8-bit, YCbCr
- Embedded HDMI audio output (up to eight channels)
- 2x RCA analog audio output (simultaneous with HDMI audio)
- Reference In connector to enable locking sync of baseband output for local environment
- System Modes to enable quick setup for lowest latency / highest protection, etc.
- Web browser accessible setup and control interface, via built-in webserver
- 1x mini-USB port providing an alternate method of initial network configuration with AJA eMini-Setup software
- NMOS and Ember+ support
- USB keyboard control for quick and easy preset recalls
- Customizable control with AJA REST API
Monitor ST 2110 Video and Audio from anywhere on the Network.
The IPR-10G2-HDMI is a SMPTE ST 2110 to HDMI Mini-Converter suited for point-of-use applications including source monitoring, multi-viewer applications or simply an HDMI feed to compatible devices.
The AJA IPR-10G2-HDMI receives SMPTE ST 2110 IP video and audio, then formats the data for output on a full size HDMI 1.4b interface.
With 3G/1.5G-SDI routers often at capacity while facilities await their transition to IP, there is a huge benefit in being able to send video sources from a feed, camera, router or edit bay via IP and provide HDMI monitoring at the destination.
The audio associated with the video stream is extracted, synchronized, and then embedded into the HDMI interface as well as output on an analog RCA interface.
Workflow
IPR-10G2-HDMI provides HDMI output from SMPTE ST 2110 video and audio over IP streams. Combine your IPR-10G2-HDMI Receiver with other AJA IP Receivers and Transmitters, or even take it a step further with AJA KONA IP or Io IP to instantly create a real-world SMPTE ST 2110 workflow for video over IP production and monitoring.
User Control
IPR-10G2-HDMI provides two key methods for control. The Control LAN Ethernet port enables full setup and control of the Mini-Converter from web browsers on any platform and REST clients. The mini-USB connector facilitates quick and simple initial network configuration, and firmware updates using AJA eMini Setup software.
- 1x RJ-45 (IEC 60603-7) for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
- HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
- Browser and REST clients supported
- 1x USB 2.0 Mini-B (IEC 62680-1) connector
- Browser-based or AJA eMini-Setup of network parameters
- NMOS transmit (Discovery, Registration and Control)
- According to standards IS-04 v1.3 & IS-05 v1.1
- LLDP (Link Layer Discovery Protocol)
- AJA REST API (Control Only)
- Discovery is supported via SSDP, allowing AJA REST API to then be used for Control
- Discovery is also supported via MDNS, allowing AJA REST API to then be used for Control
- Ember+ (no Discovery, Control only) v1.6.2
Sursă de alimentare universală
Toate mini-convertoarele AJA sunt livrate cu un sursă de alimentare universală care include conexiuni internaționale pentru utilizarea în întreaga lume.
Compact și portabil
AJA Mini-convertoare sunt suficient de mici pentru a încăpea în spatele unui monitor, în spatele unui rack sau direct pe un echipament de cameră. Un conector de alimentare cu blocare nu se poate desprinde accidental, iar un cablu de alimentare P-TAP opțional permite alimentarea cu baterii în locații îndepărtate.
AJA Mini-Matrix
Informațiile despre linia completă de mini-convertoare AJA sunt acum disponibile ca aplicație mobilă pe iOS. Linia de produse Mini-Convertoare este extinsă, iar această aplicație vă ajută să găsiți convertorul potrivit pentru orice situație, oriunde v-ați afla.
Produsele individuale au linkuri către site-ul principal AJA pentru mai multe detalii și puteți trimite prin e-mail informații despre produse direct din aplicație. Aplicația gratuită AJA Mini-Matrix pentru iPad® și iPhone® este disponibil acum în Apple iTunes® Store.
Specificația produsului
Formate video
- (UltraHD) 3840x2160p 23.98, 24, 25, 29.97, 30, 50
- (HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- (HD) 1920x1080i 50, 59.94
- (HD) 1280x720p 50, 59.94, 60
- (SD) 625i 50
- (SD) 525i 59.94
Video Quality
- Up to 1080 60p, 4:2:2, 10-bit, YCbCr/RGB uncompressed
- Up to UltraHD 30p, 4:2:2, 8-bit, YCbCr uncompressed
- Up to UltraHD 50p, 4:2:0, 8-bit, YCbCr uncompressed
Discovery, Registration and Control
- NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
- Ember+ control (no discovery, control only)
- AJA REST API control (discovery via SSDP or MDNS)
- LLDP (Link Layer Discovery Protocol)
- Supported over dedicated management Ethernet port and in-band over media ports
Media Transport Interfaces
- SMPTE ST 2110 (-10, -20, -21, -30)
- 2x SFP+ Cages – SFPs not included
- Recommended 10 GigE SFP+ modules:
- Arista Networks SFP-10G-SR Compatible 10GBASE-SR
- Fiberstore SFP-10GSR-85 10G SFP+ 850nm
- Finisar FTLX1471D3BCL (for single mode 1310nm)
- Mellanox MFM1T02A-SR 850nm 10G
Notă: Maximum supported SFP+ power is 500 mW per SFP+ cage
Video Input IP
- SMPTE ST 2110
- Single channel video input up to UltraHD
- SMPTE ST 2022-7 dual stream input for hitless switching*
- Rx support for Narrow/Wide, Gapped/Linear Modes
*Hitless switching via ST 2022-7 is supported up to 1080p 60 (UltraHD is not supported)
Audio Input IP
- SMPTE ST 2110
- Up to 16-channels* audio, 24-bit per channel, 48 kHz synchronous
- 1 ms or 125 µs packet interval
*Streams with up to 16-channels are received but only the first 8 are output
Ieșire video digitală
- 1x HDMI Standard Type A connector
- HDMI v1.4b 24/30-bits per pixel
- Frame syncing to facility clock*
- Concealment of errors due to packet loss*
*Frame syncing and error concealment functionality supported up to 1080p 60 (UltraHD is not supported)
Ieșire audio digitală
- Up to 8-channel, HDMI embedded audio, 24-bit per channel, 48 kHz synchronous
Ieșire audio analogică
- 2x RCA analog audio
- Levels at -10 dBu (nominal)
Referință
- 1x BNC
- Analog/tri-level reference input
- Allows baseband output of IPR-10G2-HDMI to be locked to the facility baseband clock
*Reference functionality support is up to 1080p 60 (UltraHD is not supported)
IP Clock
- PTP support compliant with PTP PTPv2, PTPv3 / IEEE 1588-2008
- SMPTE ST 2059-1 compliant
Interfața cu utilizatorul
- 1x RJ-45 for 10/100/1000 Base-T Ethernet
- Web and REST clients supported for remote network setup and configuration
- 1x USB 2.0 Mini-B connector
- AJA eMini-Setup supported for network setup and configuration via local desktop computer
- Web and REST configuration is also supported in-band over media ports
Dimensiuni (l x p x h)
- 5.07″ x 0.94″ x 5.06″ (128.8 x 23.9 x 128.4 mm)
Greutate
- 0.6 lb (0.3 kg)
Putere
- 5-20VDC Regulated, 13 Watts, Power supply required (DWP-U-R1 included with purchase)
Mediul înconjurător
- Temperatură de funcționare sigură: 0 la 40 C (32 la 104 F)
- Temperatura de depozitare sigură (fără alimentare): -40 la 60 C (-40 la 140 F)
- Umiditate relativă de funcționare: 10-90% fără condensare
- Altitudine de operare: <3,000 metri (<10,000 picioare)
Recenzii
Nu există recenzii până acum.